| TYPE |
|
|
| TC-2C |
Shaft
End Adapter |
|
| G21 |
Flexible
Coupling (for Magnetos M1200-A and B) |
|
| G21A |
Flexible
Coupling (for Magnetos M1200-I, NW and HA) |
|
| X-4A |
Flexible
Coupling (for Magnetos M1200-A and B) |
|
| X-3 |
Flexible
Coupling (for Magnetos M1200-I, NW and HA) |
|
| FS-1 |
Flexible
Shaft, up to 3 feet (add $3.25/ft. if longer) |
|
| SAE Drive
Joint |
Speed
Reducer (7/8-18 screw fitting) |
|
| ER-20 |
Adjusting
Rheostat |
|
| Connecting
Cable |
2-conductor
neoprene covered - #18AWG |
|
| Connecting
Cable |
2-conductor
copper armored - #18AWG |
|
| Cable
Connector |
For
Magneto with conduit outlet |
|
| B661-4 |
Selector
Switch Assembly, 6-position |
|
|
|
|
| Wall
Mounting Adapters Sheet steel: |
|
For
indicators DB-16 and 271 |
|
|
For
other indicators |
|
|
|
|
| Water/Oil/Dust
Tight NEMA 12 Housings (Wall Mount): |
|
For
Indicators DO-92, 741 and 741D |
|
|
For
Indicators DB-40, DB-17 and 954 |
|
|
For
Indicator DB-16 |
|
|
|
|
| Explosion
Proof Housings: |
|
For
Digital Indicators 4312A, 4412A (Dwg. B1657) |
|
|
For
Indicator DB-16 (Dwg. B772) |
|
|
For
Indicator DB-14, DB-40 (Dwg. B668 |
|
|
For
Indicator DO-92 (Dwg. B668A) |
|
|
For
Indicator DO-91 (Dwg. B1598) |
|
| M12-250 |
Dual
Drive Adapter - for Magneto M1200-AN (Dwg. C180) |
|
| M1213 |
Dust
Shield for Magnetos M1200-A, B, G, GA or GX |
|
| SU25CW
or SU25CCW |
Slip
Clutch for Magneto M1200-HA |
|
| SAE
Outlet for Magneto M1200-I (for flexible shaft drive) |
|
| Special
Magneto Voltages other than ½, 3, or 6 volt/1000
RPM |
|
